Test this by plugging a home phone into a phone jack and check for a dial tone. This means that your system has detected that the telephone line is out. Still at a loss? Contact your provider for service. If you’re still beeping, you may need to replace the transformer. If you have power, however, make sure that your transformer is plugged in snugly, then check your home’s circuit breakers. If your building or the neighborhood has lost power, your system will operate on battery, but it’ll let you know it’s operating on battery. This means your panel isn’t getting power. If not, contact your alarm company for service. If you have access to the panel, you can do this yourself. If the beeping keeps on beeping and beeping, however, you’ll probably have to replace the battery. If it displays “low battery” and you have recently experienced a power outage, simply wait 24-hours after the power comes back on for the battery to recharge. The culprits may be a low battery (1), bell circuit (2), system trouble (3), system tamper (4), module supervision (5), RF jam detected (6), PC5204 low battery (7), or PC5205 AC Failure. It just depends on the problem and your confidence in your troubleshooting abilities. While your alarm needs some attention, you may be able to handle it yourself.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |